ChicksDigEmToo
04-17-2006, 10:28 PM
Ok...today I spent the day looking for someone that had posted on removing the big tow mirror back cap. There was enough information on the regular mirror...but the Big tow mirrors were not the same! I decided to post this in case anyone should need it for refrence.
...with a lot of pain and frustration I got these covers off without tearing apart the truck!
There are two clips on each side of the mirror. Here's a link to my photo bucket with pictures (taken in the dark).
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02360.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02360.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02361.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02361.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02363.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02363.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02364.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02364.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02365.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02365.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02366.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02366.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02367.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02367.jpg)
After I figured out where the clips are...it wasn't really that hard. You just had to figure out which way they unclipped... the pictures should help.
If you look at the backside picture...you will see where the clips are place in relationship with the mirror. I took some pics from the front so you could get and ideas of where to place your screw driver and the best angle to get to them.
Start with the bottom clips first. It seems that that takes the pressure off the top ones which were harder to get to. Here's the trick...if you look at the caps picture (the one showing the inside of the clip) you will see which way the tabs need to be pushed. The inside tabs (closet to the truck) get pushed up, the out side tabs get pushed away from the truck!!! Good to know trust me as you cant actually see what you are doing! Get your flat head screw driver in place as shown in the pictures for each clip. The tabs closest to the truck are further back behind the mirror. The outside ones are closer to the front of the mirror assembly. This is also good to know as you most likely will over miss the tab if you reach too far back! I hope this helps you!
...with a lot of pain and frustration I got these covers off without tearing apart the truck!
There are two clips on each side of the mirror. Here's a link to my photo bucket with pictures (taken in the dark).
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02360.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02360.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02361.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02361.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02363.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02363.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02364.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02364.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02365.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02365.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02366.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02366.jpg)
http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/th_DSC02367.jpg (http://i59.photobucket.com/albums/g313/chicksdigemtoo/caps/DSC02367.jpg)
After I figured out where the clips are...it wasn't really that hard. You just had to figure out which way they unclipped... the pictures should help.
If you look at the backside picture...you will see where the clips are place in relationship with the mirror. I took some pics from the front so you could get and ideas of where to place your screw driver and the best angle to get to them.
Start with the bottom clips first. It seems that that takes the pressure off the top ones which were harder to get to. Here's the trick...if you look at the caps picture (the one showing the inside of the clip) you will see which way the tabs need to be pushed. The inside tabs (closet to the truck) get pushed up, the out side tabs get pushed away from the truck!!! Good to know trust me as you cant actually see what you are doing! Get your flat head screw driver in place as shown in the pictures for each clip. The tabs closest to the truck are further back behind the mirror. The outside ones are closer to the front of the mirror assembly. This is also good to know as you most likely will over miss the tab if you reach too far back! I hope this helps you!