Is the M1-110 the correct size for our truck, it looks awful small????

Have you looked at the stock filter? The M1-110 is the recomended size by Mobil. Try a search I may remember the 120 being a bigger usable size.


DESTRO

Is the M1-110 the correct size for our truck, it looks awful small????

thats the one I'm using. Just did mine Thursday before the meet.
m4ck

thats the one I'm using. Just did mine Thursday before the meet.
m4ck

M4ck, are you using the 110 or the 120??? The post above you said 120.

Thanks

Also look at the Bosch 3323.

I used the Bosch one time. Nice filter. I cut it open and it was very well made. The M-110 is the "official" size per the catalog. Not sure on the 120, I thougt I remembered it being a longer length 110. Either way this engine is well made, coated cylinder walls, and does not need a huge filter. More than anything change your oil at the specified interval.

DESTRO

I'm using the M1-110
No problems here.

I use the m1-110 too.

I there a site to buy the filters online? I've been to a few local automotive stores and they don't carry them.

Got mine at AutoZone. If there is not one up there you can get it online at their site.

Also there is nothing at all wrong with using the Nissan OEM oil filter. You can order them from Brian (jerseyparts) at www.yournissanparts.com
they work great. I ran quite a few of them before switching to Mobil 1 just because I pick them up when I get my oil.
M4ck

What is the type (material) and size of the drain plug gasket. Dealer want almost 2 bucks for one!!!!

YourNissanParts sells them for .69 a piece or you get them free with every OEM filter you buy from them. Oh yeh they are copper.

M4ck

Thanks M4ck. Doing it tomorrow, no time to order. ( I do think I will get a Stillen Exhaust from Brian though...............)

I will probably just stay with what I'm useing for a filter for less hassle, I use Mobil1 oil so when I buy it at the store I usually ask if they have any Mobil1 Filters.