|
jsctitan 06-03-2006, 07:17 PM i have the 2004 titan 4x4 and it seems like everytime i am in regular 2 wheel drive and i decelarate 4 lo blinks off and on. is this normal or is this a problem? by the way i just bought the truck so i dont know if it is normal LDOTITAN 06-04-2006, 12:50 AM Welcome to CT. No, this is not normal. Sorry I can't offer a suggestion on what it might be. All I can say is take it to the dealer. But, it's not normal. got_titan 06-04-2006, 01:16 AM IT IS NOT NORMAL, also theres a tsb out that addresses this problem.. jaysplaypen 06-04-2006, 03:50 AM basically blinking dash lights of any kind are a problem indicator. Have it looked at. If you ever get a blinking SES stop the engine and get towed in. Just an FYI for thiose that did not know, TheSquid 06-04-2006, 04:15 AM It's no biggie just about all of us with a 2004 4x4 had to have this done. It's just a sensor that has to be changed and it takes less than 30 minutes and it's free. spody 06-13-2006, 12:57 AM basically blinking dash lights of any kind are a problem indicator. Have it looked at. If you ever get a blinking SES stop the engine and get towed in. Just an FYI for thiose that did not know, What does a blinking SES mean? Obviously serious but...? baseballfanz 06-13-2006, 02:33 AM What does a blinking SES mean? Obviously serious but...? SES is the "Service Engine Soon". It could mean anything from minor to major. Problem is you don't know what it is until you pull the code. I left my gas cap open one time and got the SES, another time my truck kinda bog and stall, temp. guage went to H and got the SES light. pdmted1 06-23-2006, 03:17 PM I had the blinking 4LO issue too. They replaced the sensor (that the TSB says is the problem) 7 times. Yes, 7! Finally they decided to try replacing the transfer case, and that fixed the problem. Just stay persistant with them, they will get it right some day.... TheSquid 06-23-2006, 11:33 PM I had the blinking 4LO issue too. They replaced the sensor (that the TSB says is the problem) 7 times. Yes, 7! Finally they decided to try replacing the transfer case, and that fixed the problem. Just stay persistant with them, they will get it right some day.... Sounds like to me you need a different Service Department wrenching on your truck. pdmted1 06-24-2006, 02:58 PM Most definately Agreed! anthonyhicks101 08-04-2006, 09:24 PM I have this same issue. Could someone be kind enough to link to the TSB? Thanks! TheSquid 08-04-2006, 11:10 PM Here ya go. (Hint, I have this site bookmared.) http://www.nissanhelp.com/Bulletins/Titan/2004/1.htm Go to page 5 for the 4 lo TSB. | ||