Is anyone running the new Pro-Comp lift? If so I am curious how much of the stock ride was lost with the lift. And how about tire size? How big can you go without rubbing?? Thanks--Chris

Can't say about the ride, but 35 inch tires should fit easy, maybe 37's. But anything bigger than 35's is gonna be SLLOOOOOWWWWW TITAN!

Check here http://www.1010tires.com/TireSizeCalculator.asp?action=submit

i dont know i think 35s are gonna be close and still rub a bit

Im running 35x13's on a 2&1/2" but its actually a full 3" mini lift plenty o' room check out my pics..just watch the mud gards..it hits just a bit in full turn I'm goin' out with a dremel this morning to fix that

Thanks for the pic Linknuc. did you find fitting those 13" wide nittos difficult to the oe rims?.By the way your truck looks great.

linknuc how did you get a 3" mini lift? Do have dr coilovers? I never hear dof a 35x13 tire size any more pics?

linknuc how did you get a 3" mini lift? Do have dr coilovers? I never hear dof a 35x13 tire size any more pics?

2 inches from the PRG, 1 inch from the tires. I have the same amount of lift up front.

Im running 35x13's on a 2&1/2" but its actually a full 3" mini lift plenty o' room check out my pics..just watch the mud gards..it hits just a bit in full turn I'm goin' out with a dremel this morning to fix that

Have you taken it off road like that yet? That setup lwould be great if it doesn't rub off road.

I am running the procomp 6" with 35x17 inch tires. the only problem i had was turning hard right or left because of my mudflaps. I have had no problems with the rear at all, I used the 2" blocks instead of the add a leaf to the rear. I noticed a more softer ride, but tire pressures will change that to a harder or softer ride. Less air and your truck will tend to push in the corners but will ride better on bumpy roads, more air and it will take the corners better but you will notice the bumps more