For those that don't have one, just ask those that do! It does does work! Adds decent HP and gives better gas mileage. Plenty in stock at a special price.

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_04up_ar_throtb

Sample pic:

http://www.burtmanindustries.com/images/prodimages/4run_95_02_ar_throtb.jpg

EDIT:
I'm also able to offer you guys this Airaid intake at a great deal as well! In stock on both. Usually ships same day :)

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_airaid_intake

http://www.burtmanindustries.com/images/prodimages/ttn_arm_airaid_intake.jpg

Bump for a killer deal.

Go here to order: No promo codes needed, etc.

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_04up_ar_throtb

pm me with price

Is the price on the web site the same price extended to CT members? Having never done this group-buy thing I'm not sure how it works.

Jim

One other question: Are there any dyno results for the TBS? I found results on the airaid web site for the intakes, but not the TBS.

Jim

pm me also with price thanks

Is the price on the web site the same price extended to CT members? Having never done this group-buy thing I'm not sure how it works.

Jim

One other question: Are there any dyno results for the TBS? I found results on the airaid web site for the intakes, but not the TBS.

Jim

If you send him a Private Message (PM), he'll send you the price.
As for the dyno, I believe most of the benefit from the TBS comes down low, and since you won't see below 3,000 rpms on a Titan dyno, it probably won't show much power gain, if at all.
I will say, I added one to my previous Titan and saw an improvement in my MPG.

PM me with the price also. I just ordered the monster banks.

Is the price on the web site the same price extended to CT members? Having never done this group-buy thing I'm not sure how it works.

Jim

YES :) All of our items on the website are priced as low as they can go for forum members. No promo codes needed, etc.

CLICK BELOW TO ORDER.

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_04up_ar_throtb

OK, I put in my order. Low end power and better MPG? Sounds good to me.

Jim

I currently have a volant intake on the truck. if i were to get the tbs, would i need to do any modifications to the intake tube?

I currently have a volant intake on the truck. if i were to get the tbs, would i need to do any modifications to the intake tube?

No modifications necessary. This will work with every intake we sell, volant, injen, AEM, K&N, etc. etc... :)

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_04up_ar_throtb

Also, be sure to check the website for these intakes if you need even more power.

EDIT:
I'm also able to offer you guys this Airaid intake at a great deal as well! In stock on both. Usually ships same day.

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_airaid_intake

http://www.burtmanindustries.com/images/prodimages/ttn_arm_airaid_intake.jpg

hmmmm.....should i spend more money already? hahaha :D

No modifications necessary. This will work with every intake we sell, volant, injen, AEM, K&N, etc. etc... :)

Also, be sure to check the website for these intakes if you need even more power.
Actually, on the Volant..you'll have to cut about 1-1.5" off of the Volant intake tube. Otherwise it won't fit because the radiator will be in the way. It's real easy though..Take about 5 minutes with a sawzall.

Edit: You'll also have to cut out the metal screen on the factory gasket.

I agree...with my Injen CAI...I had to trim the tube for my Helix TB spacer. But it's really easy.

sent you a PM jason :D

just ordered mine :D i made my order by credit card this time jason

:)

Still on sale!

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_04up_ar_throtb

what is the price ?

:)

Still on sale!

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_04up_ar_throtb

Right above on the link :)

Just ordered this to go along with my AEM CAI. I'll report back if any modification/cutting was necessary.

Deal still going.

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_04up_ar_throtb

EDIT:
I'm also able to offer you guys this Airaid intake at a great deal as well! In stock on both. Usually ships same day :)

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_airaid_intake

http://www.burtmanindustries.com/images/prodimages/ttn_arm_airaid_intake.jpg

Everything in stock, ships same day.

Also, here is something new that is similiar.

http://www.burtmanindustries.com/images/prodimages/motorvator_spacer.gif

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_04up_mot_throt

Nice prices.

Gooood MOtovartor ..

Is there a cover for the box holding the CAI or is it intended to be left open on the top?

PLEASE send pm me the price on the airaid intake.

Just curious, I gotta Airaid on the way and I have an S&B. Anyone know if there will be trimming needed?

Just curious, I gotta Airaid on the way and I have an S&B. Anyone know if there will be trimming needed?

You should be fine. I've sold tons of spacers to people with the S&B that we sell.

Actually, on the Volant..you'll have to cut about 1-1.5" off of the Volant intake tube. Otherwise it won't fit because the radiator will be in the way. It's real easy though..Take about 5 minutes with a sawzall.

Edit: You'll also have to cut out the metal screen on the factory gasket.

Ok, I realize this post is almost a year old, but it's still good. Is the removal of the metal screen required or recommended for a TBS?

I have no performance mods yet and I'm interesting in anything that will help towing and get me better gas mileage in geneneral (yeah, I know this is subjective too).

No, you don't need to. The throttle body spacer alone will give a nice boost in gas mileage and more power.

The generation is the Volant? The Website says Gen 1. I'm pretty sure I've read people have Gen 3. What's the difference and how can I tell one from another?

Gen 3, we also have on the site, and that's the dry filter model. There have been fitment issues with this one, so it's not fully ready yet.

For the best bang for the buck, I like the S&B intake the best.

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_sb_intake

http://www.burtmanindustries.com/images/prodimages/s&b_intake.jpg

http://www.burtmanindustries.com/zoomprod.php?id=ttnc_sb_intake

On sale as we speak, and special custom lettering can be added for free. :-)[/QUOTE]

Hmm, would the S&B + Motorvator be a good combination?

Hmm, would the S&B + Motorvator be a good combination?

Yep. That's actually a great combo.