|
bigblue35 01-04-2007, 11:08 PM hey greg i was told i can get atleast 10" lift thru you for a 07 4x4 titan. now im new to the titan suspension and dont know how these lifts compair to chevys(which is what i have) so im still learning about these things. now can you give me some advice on gettin the truck up 10" on some 37's? and how much will the kit cost? wakeboarder2186 01-04-2007, 11:33 PM im sure you can, cst 7", radflow coilovers. if that doesnt get you there a 3" body lift will on top of that. bigblue35 01-04-2007, 11:54 PM yea my bad i already new that. i didnt know if cst had a full 10" for the titan, but im on the cst site and lookin everything up. 1900 isnt to bad for a 7" lift kit. what can you do for me tho PRG? wakeboarder2186 01-05-2007, 12:09 AM call greg, that is the best way to get ahold of him, his time online is very limited because of the ammount of work he does, give him a call, really nice guy and knows his stuff can get the number at www.prgproducts.com i<3mytitan 01-05-2007, 12:43 AM being that i have a 2wd and not 4wd, i don't really know how much water my answer holds, but if you have the CST kit, get some TC arms along w/ Radflos to provide an additional 2-3" lift on top of the kit. Then get the glassworks fenders, and you MAY need to do the pinch weld mod to clear 37s. However, this depends on the offset and width of the wheel. However, when i spoke to Greg about putting 37s on my truck, he told me that i have plenty of room once i get the glass fenders; i would imagine it's the same w/ a 4wd supadupaj 01-05-2007, 01:13 AM I have a fabtech kit with radflos and a spacer on top of the coilovers. I have right at 10" of lift. My 37's will be here tomorrow and hopefully put on Sat. I will post some pics then.. I believe they will fit without any problem. bigblue35 01-05-2007, 01:20 AM nice did you stay with the 22" rim? id like to see this. supadupaj 01-05-2007, 01:24 AM nice did you stay with the 22" rim? id like to see this. No. I went down to a 20" rim. Putting the 22's on my wifes Armada... Transformer 01-05-2007, 09:45 AM yea my bad i already new that. i didnt know if cst had a full 10" for the titan, but im on the cst site and lookin everything up. 1900 isnt to bad for a 7" lift kit. what can you do for me tho PRG? This is the route I went ... for what its worth ! I have a fabtech kit with radflos and a spacer on top of the coilovers. I have right at 10" of lift. My 37's will be here tomorrow and hopefully put on Sat. I will post some pics then.. I believe they will fit without any problem. Looking so forward to seeing that at the Meet Jason. Maybe this time we can caravan up to it ? | ||