Visited the Dyno today!! [Archive] - Nissan Titan Forum: Club Titan Forums

: Visited the Dyno today!!


MikeZ
08-31-2004, 04:01 PM
Another Dyno Visit!!!!

--------------------------------------------------------------------------------

Hello all!!
Took the Titan to another Dyno today. This places uses a dynojet dyno. Very impressed with the operation, these guys know their stuff. Before I get to the numbers, here is my mods so far:
-All 2.5 pipe from cats back (no OEM resonators), Magnaflow 5x11 dual in/dual out, dual 2.5 pipe out to back of truck to 3.5 rolled tips.
- K&N drop in filter (no CAI)
Now conditions: 91.5 degrees with humidity at 45%. 87 octane gas. Non synthetic 10-30 oil. rear diff has been changed to M1. Truck only has 3400 miles on it.
Now the numbers:
Three pulls averaged out to 273.41 HP at 5000.23 RPM. Torque averaged out to 330.31.
Very happy with these numbers, no doubt the exhaust mods have helped. I believe now would be good time to drop a volant CAI in and go back for another dyno pull.
[/img]

BiXLL
08-31-2004, 05:10 PM
Nice numbers Mike! What kind of money are you talking to have the dyno done? I would be interested in knowing what a complete stock Titan would do!

MikeZ
08-31-2004, 06:40 PM
Dyno's usually range between 60-70 bucks for 3-5 pulls. You want to do at least 3 pulls so you can get an average. I would too like to know what the stock will do, I should ahve dynoed before my mods :? I am pretty sure Jettech did a stock dyno run.

JetTech
09-01-2004, 05:48 PM
Dyno's usually range between 60-70 bucks for 3-5 pulls. You want to do at least 3 pulls so you can get an average. I would too like to know what the stock will do, I should ahve dynoed before my mods :? I am pretty sure Jettech did a stock dyno run.

But of course... :) Mine wasn't making much power in stock form with 1K miles on it. I think it came in at 253hp and 300tq. Others have had higher numbers in stock form after they let it get a few miles on it.

Matt007az
10-19-2006, 01:46 PM
sounds like fun i want to get my truck on the dyno

txhardhittaz
10-19-2006, 02:18 PM
Where can we get these dynos done at??? Im in Texas and i was interested in getting mine on one of these dynos..

ttugrad95
10-19-2006, 02:24 PM
Here is a list of all the places in Texas that has a Dnynojet Dyno.
http://www.dynojet.com/maps/autodynos/tx.htm

txhardhittaz
10-19-2006, 02:34 PM
Oh wow theres more than i thought lol..thanks TTU

ttugrad95
10-19-2006, 02:35 PM
No problem, there are probably more with other brands.