does any one know if a 35/12.50/17 will work with a 2 1/12 frt kit. i know a guy with 33's on a stock truck. his has the off road package, and mine does not if it matters. any help would be greatley appreciated.

thanks

mike

You might want to wait a little before changing the tires based upon this lift. The reason I say this is you have a 4x4 and a 2.5" leveling kit.

PRG sells two versions. The 2" for 4x4 Titans, and the 2.5" for 2wd only. Several people with 4x4 Titan have gone against this advise, and have issues with something hitting the coil bucket, (I think the a-arm). Some have traded back to PRG, some have tried a mode where they grind away part of the bucket.

So anyway, I'm just suggesting you try it for a couple of weeks before additional mods. Maybe take it out on a poor dirt road and run it a little hard.

Also, they say to re-check or maybe re-torque everything after you've run it a few days.

I have a 3 inch lift from nitrousenterprises on mine with 315-70-17 BFG A/T on my truck. They are "35s" but not the 12.5. I had to bend back the pinch weld on the rear of the fender and heat up the plastic and push it back. Pics are on thier site www.nitrousenterprises.com Here is a pic of the space behind the tire after I pushed it back. neither tire has rubbed.