Hey guys. As the title says, I'm about to order these tires for my truck. I just wanted to make sure that the 325/60R18 would fit because I'm also getting new rims. These tires will be going on some 18"x10" Eagle Alloys 140 Series wheels. So, will they fit aight?

And yes, I'll post pics when they get on ;)

Hey guys. As the title says, I'm about to order these tires for my truck. I just wanted to make sure that the 325/60R18 would fit because I'm also getting new rims. These tires will be going on some 18"x10" Eagle Alloys 140 Series wheels. So, will they fit aight?

And yes, I'll post pics when they get on ;)
10" wheels are not a good choice for a Titan, especially with only a level kit, and when the backspacing is only 4.5".
They will stick out 3" more than the stock rims.

Same backspacing on a 9" rim, (so only sticks out 2" more than stock), rubbed some at the pinch weld on my friend's 4x4 with a Procomp stage-1 lift, but taller 35x12.5" tires. Someone else ran 9" width rims with the same 4.5" b.s. and 33.2" diameter LT295/70R17 Nitto TGs with a level kit, and also had rubbing. With a 1" wider rim, (and the wider 325s), you will definitely need to trim the pinch weld, but I don't know how much.

Dang it, that sucks... I already have the rims, so I can't give them back, but I can change the tires I buy.

I can get the tires in 305/60R18. Will that be better?

And I'm putting a leveling kit on too, just so yall know

Yep, the 305s would help. You will still need the Kartmanaz's pinch-weld-mod (http://www.clubtitan.org/forums/showpost.php?p=231604&postcount=8)though.

Maybe you can sell them or trade with one of the guys that is running a 9" lift, or has glass fenders. Sticking out 3" more than stock is a lot, but especially on a leveled Titan.

Aight man, thanks for that. And yea, I hate the tires stickin out like that...

Anyone else have an opinion?

Go with the 305's, just put em on, bust out the Pinch Weld Mod and see what you think first!!! The only reason i'm saying this is because you already have the wheels.......

where did you get your wheels at, you can take them back and ask for a swap to a 8 or 9 inch wheel.

That setup will definately rub. I have MT ATZ 325/50-20's on 20x10's. Same overall size you are talking about, except my wheels have slightly less backspacing. I have 4" spindles and radflo coilover cranked for about 3" lift for a total of 7" in the front. They rubbed at 6", but clear pretty good now at 7". With only a leveling kit it would be a rubfest.

I would either get more lift or get different wheels.