My daughter ran through a ditch in her 2004 Titan 4-door, resulting in the driver's airbag going off and both front seat belts locking down. There was no direct front end collision ( just bottom of front bumper ) or contact to the grill. Just basicaly a good old- fashioned ditch clean-out, bottoming out the front skid plate and bending a control arm when she ran over a metal culvert.
Other than the module reprogrammed and the seat belts rebuilt/replaced, and the airbag replaced, what other things need to be looked at or replaced to have the system work properly and keep it all from going off once I turn on the key? ( Such as front crash sensor etc?-is it a one shot item? ) Thanks for any help. That is one tough truck! :scheibe-big:
Other than the module reprogrammed and the seat belts rebuilt/replaced, and the airbag replaced, what other things need to be looked at or replaced to have the system work properly and keep it all from going off once I turn on the key? ( Such as front crash sensor etc?-is it a one shot item? ) Thanks for any help. That is one tough truck! :scheibe-big: