What is this? - Nissan Titan Forum
Thread Tools Display Modes
post #1 of 3 Old 12-13-2012, 04:11 AM Thread Starter
Join Date: Oct 2012
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
What is this?

I have a 2005 titan 4x4, and read about the max you can lift is 2". I bought a 2" front lift and 1.5 rear, and am having cbc? wear the top of the strut is touching the UCA. What do i need to do to make it fit? can i just get the rough country UCA to clear it? and what is the rubber piece on top of the strut? is that a spacer that was already put on? is it stock?

Uploaded with ImageShack.us

Uploaded with ImageShack.us
s2ki is offline  
Sponsored Links
post #2 of 3 Old 12-13-2012, 11:30 AM
Madbeav7210's Avatar
Join Date: Aug 2012
Location: Logan,WV
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
That is the coil spacer that comes with the leveling kit. I am currently running the rough country arms. I put a 3 in leveling kit on my 04 KC. The arms clear the coil bucket with just a little trimming but the bushings in the arms ate junk. After about a month of driving then the bushings in the arms warm up from the engine heat the bushings pop when turning. But I will live with it because I'm not paying 600 + for prg or total chaos arms. A little too pricy for me.

Sent from my iPhone using AutoGuide.com Free App
Madbeav7210 is offline  
post #3 of 3 Old 12-13-2012, 10:26 PM
Misfit482's Avatar
Join Date: May 2009
Location: milwaukee area
Posts: 468
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Those rubber pieces on top are coil spacers that were already on the struts. Take them off and use the new ones you have. You can go up to 4" on an '05 4X4, but you will require upper control arms and you would have to get the other 2" of the lift from the preload of an adjustable coilover. If you do that, I'd recommend Dirt King or PRG uppers and Bilstein 5100's.

'07 CC 4X4 banks ram air w/ tb screen removed, banks monster exhaust, prg minilift, PRG UCA's, 5100's mid perch, sway bar removed, 5125's, DK shackles, '08+ brakes with Powerstop D/S rotors and pads. PRG SS braided brake lines, headlight mod w/ Morimoto switchbacks, Legit 55w 6000 hid's (lows and highs), modded tail lights, street scene grille shell, xd diesel 20x10 w/ terra grapplers, pinch weld mod, axle vent mod, BW pocket flares, PD'd stuff, BL step rails, SM designs bezel kit, LPD Tru-cool radiator bypass mod, ADD W1 magnetic oil plug, Cajun B pipes.
Misfit482 is offline  

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Forum Jump

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off