Power Burnout Mod-Brake pedal w/pics

[SoBeGraphics]

yup you just need to interupt the circuit.

[kseer]

Originally Posted by SoBeGraphics

yup you just need to interupt the circuit.

and i do that by flipin the switch i assume

[SoBeGraphics]

correct - the switch opens the circuit. i want to do this, if i ever get some free time, just as a theft deterrent.

[kseer]

aight heres my suplies any of em not gnna work? before i open em also how do i conect the switch to the that (VVV) or do i just conect it straight to the wire somehow

http://www.radioshack.com/product/in...entPage=family

http://www.radioshack.com/product/in...entPage=family

http://www.radioshack.com/product/in...tId=2062523&cp

http://www.radioshack.com/product/in...entPage=family

[robexploring]

You got everything you need, except I would use braided copper wire, not solid. It is easier to run, not as stiff and is better against breakage went bent.

You can also grab some small dia. wire loom(black, maybe 3/8" or 10 mil.) for an ultra stealthy install.

[kseer]

aight i got the switch done its basicaly a switch w/ 2 male conectors atatching to 2 feale ones w/ 2 seperate wires coming out... now when i cut the harness wire do i atatch these 2 wires and eclctrical tape it or put a plastic screwp cap on it??

[robexploring]

Crimp them. Use these:

http://www.radioshack.com/product/in...entPage=family
If you do not have a crimping tool, you can use plyers. Just don't squeeze so hard you cut the wire.

[kseer]

sorry but still not graspin it do i conect the switch wires too the cut hareness wires? im more of a visual learner...

[robexploring]

Your gonna cut the wire and install a switch:

..........................................cut here
comp.--------------------End A{A.....B}End B---------------brake pedal
..................... ..crimp to End E|E......F|crimp to End F
............................................|..... ..|
blade connector End C to switch|C.....D| End D blade connector to Switch
...............................................swi tch

You cut the factory wire, that leaves you 2 factory wire ends lets call them end A and end B

From your switch you also have 2 wires, and 4 wire ends. we will call them C, D, E and F.

Ends C and D will get connectors and go to the two posts on the switch.

Ends A and E will be crimped together. Ends F and b will be crimped together. That's it, your done.

Originally Posted by kseer

sorry but still not graspin it do i conect the switch wires too the cut hareness wires? im more of a visual learner...

Yes, Thats it!!!!

[kseer]

Originally Posted by robexploring

Your gonna cut the wire and install a switch:

..........................................cut here
comp.--------------------End A{A.....B}End B---------------brake pedal
..................... ..crimp to End E|E......F|crimp to End F
............................................|..... ..|
blade connector End C to switch|C.....D| End D blade connector to Switch
...............................................swi tch

You cut the factory wire, that leaves you 2 factory wire ends lets call them end A and end B

From your switch you also have 2 wires, and 4 wire ends. we will call them C, D, E and F.

Ends C and D will get connectors and go to the two posts on the switch.

Ends A and E will be crimped together. Ends F and b will be crimped together. That's it, your done.



Yes, Thats it!!!!

AHHHH much better thanks for putin up w/ me