Nissan Titan Forum banner
Discussions
About
Our Top Forums Full Forum Listing →

General Discussion

Discuss anything about your Nissan Titan.
  • 198K
  • 26.3M
  • 198K
  • 26.3M

Off Topic

Anything goes here. Be warned this area could get crazy. Must remain within site rules.
  • 132K
  • 10.5M
  • 132K
  • 10.5M

Exterior Mods

Anything you have modded outside the Titan. Including Nerf Bars, Bed Rails, Bed Covers, Brush Guards, Fender Flares, Bug Guards, Window Visors, Splash Guards....etc.
  • 54.5K
  • 8.4M
  • 54.5K
  • 8.4M

Technical Discussion

Technical tips from Titan owners and mechanics. If you have a tip post it here. If you need technical help ask your question here.
  • 27.9K
  • 9.1M
  • 27.9K
  • 9.1M

Suspension

Discuss lift kits, leveling kits, lowering kits, springs, shocks and anything else between your tires and body.
  • 24.9K
  • 5.6M
  • 24.9K
  • 5.6M
Trending Discussions All Trending Discussions →
  1. Airbag blinking light wont reset!!!

    Interior Mods
    Hey everyone and thanks for your answer in advanced. I have a 2008 Nissan titan and the airbag blinking light wont turn off(reset). I tried the "turn key on and off for 5 seconds" and it wont work. At first the light was blinking fast and after i did the reset "key on and off" the light...
  2. IPDM - ECU relay problems, symptoms and solutions

    Technical Discussion
    As of late I have seen a lot of posts of truck not starting, sputtering or shutting off while driving. Most of these are usually because of the ECU relay failing or in some cases the whole IPDM board failing. IPDM = Intelligence Power Distribution Module Symptoms - there have been lots of...
  3. Alternatives to Nissan Matic "J" ATF

    Scheduled or Preventive Maintenance
    Got fed up at the stealership, paying $9.00 a quart to do my own ATF flush. So, I went to my local Pep Boys store, and found some Castrol that said "Multivehicle" ATF. Right on the bottle it said that it was recommended for use where ever Nissan Matic "J" is prescribed. Went home, went to...
  4. My JBA Header Install

    Performance Mods
    So I figured I would do one since I just got done installing mine. I looked at many different header install post to help me along the way so I hope that this one can help anyone that is planing on doing this install themselves. Ok so tools that you will need: Jack Jack Stands 1/2" socket...
  5. Tranny Cooler Added Long TruCool 4588

    Technical Discussion
    Ok well here’s how to do a Tranny cooler install. Parts: 1 - Long TruCool #4588 Kit 2ft - 5/16 Gates transmission hose 4 - zip ties 1 - Qt of J-matic 2 - large self tapping Screws 2 - small self tapping screws Tools: Screw driver, Drill, Dremel, wrenches Time: 2 hours Ok I went to IPT...
Top