Nissan Titan Forum banner

1 - 20 of 36 Posts

·
Premium Member
Joined
·
5,842 Posts
Discussion Starter #1
I am interested in making my own intake to draw air from the stock fog light holes. Has anyone done this and or do any of you have any info on doing this. I have found a couple sites on the net about doing it on cars. Any info you guys have would be nice.
M4ck
 

·
Registered
Joined
·
4,346 Posts
Darn, there goes my idea! LOL

I was also thinking about this, but kinda need to know the CFM required through those openings. I was under the impression that we needed to maintain at least 4.0 - 4.5 inche diameter tube to get enough air


??? dunno, still working on it, though. I'll get with you more later m4ck
 

·
Registered
Joined
·
13 Posts
Did this Several weeks ago, rebuilt the top of the air intake higher so I could fit a cone type in it, cut away most of the tube in the box to allow more air in, the tube built to the orginal cover was rebuilt using 3" pvc pipe, I cut a slot in the pipe for the MAF to fit in, so far no codes error has come up, and the engine feels stronger.
 

·
Premium Member
Joined
·
9,246 Posts
Yes, Please post us some pics Endurance!
 

·
Premium Member
Joined
·
5,842 Posts
Discussion Starter #15
WoW thats bright. I think I'm looking for something a little more subtle. Man that catches your attention for sure.
 

·
Premium Member
Joined
·
5,842 Posts
Discussion Starter #18
Man that is good work. Did you notice any difference after installing this mod.
 

·
Registered
Joined
·
13 Posts
m4ck said:
Man that is good work. Did you notice any difference after installing this mod.
Sure did, Not like a supercharger would do, but you notice things like going uphill and the truck doesn't want to down shift.
 

·
Registered
Joined
·
13 Posts
If any one is going to do the mod I have a few tips for you. (1) The size of the pvc piping must be 3" ID, I tried one that was only 2 3/4" and it keep throwing a code error (2) Make a mockup box out of cardboard first, then tansfer the the cardboard cut out to the sheet metal (3)The box does not snap down or anything because the hood keeps it in placed (4) Wrapped the whole thing in insul board (sunsceen dash protectors work good) and taped it up with aluminium tape.
 
1 - 20 of 36 Posts
Top