Nice numbers Mike! What kind of money are you talking to have the dyno done? I would be interested in knowing what a complete stock Titan would do!
Visited the Dyno today!!
Another Dyno Visit!!!!
--------------------------------------------------------------------------------
Hello all!!
Took the Titan to another Dyno today. This places uses a dynojet dyno. Very impressed with the operation, these guys know their stuff. Before I get to the numbers, here is my mods so far:
-All 2.5 pipe from cats back (no OEM resonators), Magnaflow 5x11 dual in/dual out, dual 2.5 pipe out to back of truck to 3.5 rolled tips.
- K&N drop in filter (no CAI)
Now conditions: 91.5 degrees with humidity at 45%. 87 octane gas. Non synthetic 10-30 oil. rear diff has been changed to M1. Truck only has 3400 miles on it.
Now the numbers:
Three pulls averaged out to 273.41 HP at 5000.23 RPM. Torque averaged out to 330.31.
Very happy with these numbers, no doubt the exhaust mods have helped. I believe now would be good time to drop a volant CAI in and go back for another dyno pull.
[/img]
--------------------------------------------------------------------------------
Hello all!!
Took the Titan to another Dyno today. This places uses a dynojet dyno. Very impressed with the operation, these guys know their stuff. Before I get to the numbers, here is my mods so far:
-All 2.5 pipe from cats back (no OEM resonators), Magnaflow 5x11 dual in/dual out, dual 2.5 pipe out to back of truck to 3.5 rolled tips.
- K&N drop in filter (no CAI)
Now conditions: 91.5 degrees with humidity at 45%. 87 octane gas. Non synthetic 10-30 oil. rear diff has been changed to M1. Truck only has 3400 miles on it.
Now the numbers:
Three pulls averaged out to 273.41 HP at 5000.23 RPM. Torque averaged out to 330.31.
Very happy with these numbers, no doubt the exhaust mods have helped. I believe now would be good time to drop a volant CAI in and go back for another dyno pull.
[/img]
1 - 9 of 9 Posts
Dyno's usually range between 60-70 bucks for 3-5 pulls. You want to do at least 3 pulls so you can get an average. I would too like to know what the stock will do, I should ahve dynoed before my mods :? I am pretty sure Jettech did a stock dyno run.
But of course...MikeZ said:Dyno's usually range between 60-70 bucks for 3-5 pulls. You want to do at least 3 pulls so you can get an average. I would too like to know what the stock will do, I should ahve dynoed before my mods :? I am pretty sure Jettech did a stock dyno run.
Mine wasn't making much power in stock form with 1K miles on it. I think it came in at 253hp and 300tq. Others have had higher numbers in stock form after they let it get a few miles on it.
sounds like fun i want to get my truck on the dyno
Where can we get these dynos done at??? Im in Texas and i was interested in getting mine on one of these dynos..
Here is a list of all the places in Texas that has a Dnynojet Dyno.
http://www.dynojet.com/maps/autodynos/tx.htm
http://www.dynojet.com/maps/autodynos/tx.htm
Oh wow theres more than i thought lol..thanks TTU
No problem, there are probably more with other brands.
1 - 9 of 9 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Nissan Titan Forum
A forum community dedicated to Nissan Titan owners and enthusiasts including the 4x4 and XD. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
